Ltf science

From DIDEAS Wiki
Revision as of 16:02, 17 December 2009 by Ceb (talk | contribs)
Jump to: navigation, search

PF Users Navigation:

Edit

Dec 2009 - static test

potential function @ BD -11000, sweep -9 to 9 amps (in reverse BD experiment)

  • The backdrive motor was fixed at -11000, and the robot current was stepped with the following pattern: 0.2, -0.2, 0.4, -0.4, 0.6 amps, ..., 9, -9 amps. After the current step the system was allowed to settle. The LW was collected via RS232 - appx 87 samples averaged. This plot consists of appx 12 hrs of collection the full experiment cycled the backdrive motor from 21000 to -29000 (steps of -2000). This plot contains only the instances where the backdrive motor position == -11000. The LW (charge amp was not zeroed except at the very start of the experiment and its drift is apparent.) Ltf_matlab_source#ltf_pf-2009-12-16.m

http://18.85.17.197/for_wiki/png/ltf/ltf_potential_plot_9amps_bd_m11000.png

force dependence on BD position (forward BD motion)

http://18.85.17.197/for_wiki/png/ltf/force_dependence_on_bd_posion_121509.png


early experiments

resonance observed developing belt thrash test

  • Holding the BD motor fixed, driving the robot motor w/current mode square wave at specified frequency.

http://18.85.17.197/for_wiki/png/ltf/belt_resonance.png

zoom in - resonance observed developing belt thrash test

  • Zooming into a specific section:

http://18.85.17.197/for_wiki/png/ltf/belt_resonance_zoom.png