Revision as of 19:51, 24 January 2009

proto1 (previously proto3) (right)

01-16-09 : Proto 1 Now Has Gear Box 3 in it and a New White GT2 Belt and adjust to 5.64N using outlined fixture process
1-11-09 : needs K3 ramps
1-11-09 : needs lock tight on 4 black K3 bolts, and 4 side plate shoulder screws.
1-11-09 : belt is really tight. Lots of friction.
1-11-09 : will assembled with Upd_218_controller#110-008 and Upd_217_power_board#110-008
1-8-09 : board set problems that caused oscilation? with initial mode 3 switch. Safety fet or anther failed.
1-6-09 : believe that power board is bad. will be updated with Upd_217_power_board#110-007
12-31-08 : needs more testing
12-31-08 : realized that PROTO1 plated was recently mounted onto ankle - thus PROTO3 became PROTO1
12-13-08 : SC and MC operational (respond to commands / LEDs flash). Power board not lit. filter, max PWM 30k.
12-12-08 : magic smoke escapes. (FET Upd_217_power_board#110-004
12-8-08 : operational with WOW pack
12-7-08 : +20% series spring, with clamp in stiffest position

@@ Line 1: / Line 1: @@
+*[[Aiw_hardware]]
+*[[Wow_left]] [[Wow_right]] [[proto3]] [[ProtoBAK]]
+*[[Upd_pcb | PCB Hardware]]
+*[[AIW_assembly | ASSEMBLY NOTES / INSTRUCTIONS]]
 =proto1 (previously proto3) (right)=
 *01-16-09 : Proto 1 Now Has Gear Box 3 in it and a New White GT2 Belt and adjust to 5.64N using outlined fixture process