Revision as of 15:59, 2 November 2009

take status of the 217 and 218 boards.
- we need a board set (217-218) for GG.
- diagnose and fix FET#1
- try to repair other damaged SC/MC (218), and FET (217) boards.

keep records of which PCBs are in which robot units.
make 9wire x 1mm straight cables. Suggest 8 and 10" length- suggest 2 to 4 of each. See example cable connecting S3 to new SWIFI (WIP4C). This will help GG.
complete assembly of #2 WIP4c
learn to program MPD boards, Swifis, and radios

document status of PCAs Wip4c Pser2h
make sure the both RE40-EC30 bench test units have good EC30s.
- probably rebuild one with an EC30-mile.
build set of cables for the (old) SWIFI???
what is the status of IMU#4 (no wiki entry) Upd_219_imu#4

notes

@@ Line 1: / Line 1: @@
-* diagnose cause of S3 failure (run the [[Upd_2x0_217_power_board#200-217-009 | FET#9]] through the bench test until there is a problem.)
+* Return  [[Upd_2x0_218_controller#218-009 218-009]] [[Upd_2x0_217_power_board#217-009 217-009]] to S3
-* If [[Upd_2x0_217_power_board#200-217-005 | FET#5]] and [[Upd_2x0_218_controller#200-218-007 | SC#7]] successfully run overnight bench test - then install into S3.
+* [[Upd_2x0_217_power_board#200-217-005 | FET#5]] and [[Upd_2x0_218_controller#200-218-007 | SC#7]] are believed to be available to GG
 * take status of the 217 and 218 boards.