Difference between revisions of "COPMM1-REV0 PINOUT"
From DIDEAS Wiki
m |
m |
||
Line 2: | Line 2: | ||
==Power header == | ==Power header == | ||
+ | *Connect a "floating" DC 48 volts to HV+ and HV COM | ||
+ | *Connect the motor to the signal MOT U,V,W (U,V for brushless DC) | ||
+ | *Signal ground / chassis ground can normally remain unconnected | ||
+ | |||
{| border="1" cellpadding="5" | {| border="1" cellpadding="5" | ||
|+7 position power / motor header | |+7 position power / motor header |
Revision as of 07:47, 10 June 2005
Power header
- Connect a "floating" DC 48 volts to HV+ and HV COM
- Connect the motor to the signal MOT U,V,W (U,V for brushless DC)
- Signal ground / chassis ground can normally remain unconnected
pin# | board lable | function |
---|---|---|
1 | SIG GND | low current signal ground |
2 | HV COM | high voltage common (ground) |
3 | HV+ | high voltage (48V) |
4 | MOT U | Amplifer U output to motor |
5 | MOT V | Amplifer V output to motor |
6 | CHS GND | Chassis ground |
7 | MOT W | Amplifer W output to motor |
DB25
|
|
|
RJ45
pin# | function |
---|---|
1 | NC |
2 | RxD Input |
3 | Signal ground |
4 | Signal ground |
5 | TxD output |
6 | NC |