Biomech wireless
From DIDEAS Wiki
- BiomechDocs BL Knee PFresearchE
- Biomech Documentation links:
- AKCPU2z BLMD6c BLFT6c PSER1c Imu_2010 Emg_2009 Ric Upd_pcb
access point
An access point for use by the robots has been setup. Verifiy that is operational at the following URL:
http://bmech4.media.mit.edu:8080/
From the AP status page (no password required), you will also be able to see if wireless devices have connected, along with their IP.
with SWIFI
- wifi_fast.py -i bmech4 -V ak_p32 -f xx -F
- bmech4 is access point, with lan ip 10.2.0.251, uses DMZ to route traffic.
- A 4 wire cable with pins 2,3 swapped is connected from PSW1 to the SWIFI port labeled M
- This interface is NOT isolated and can power the SWIFI
SWIFI LAN IPs
- S5 = 10.2.0.218
- S3 = 10.2.0.216