Upd pcb

PCB Hardware Assembly PFCmdMenu iochan Merge

Gmail Powerfoot tracker

R2x0 SCMC

State/Motor Controller (218)

R2x0 Power/FET

FET/POWER board (217)

IMU

• 3 known

IMU

PCB needed Revisions

• debug documentation should should show all TP pads, and not be the mirror image.

FET

• populate coin charger as default with 6.3V target voltage
• way to measure coin cell voltage without charger enabled? MTR ENABLED -> disable 6V LDO

SCMC

• populate so local vbat is default (R222, R233 installed)
• locate IMU header for easy access. possibly rot180 - or move 2mm away from edge.
• remove 1.25mm headers for EC30, replace with single 12x0.8mm header. add 3.3V to 5V level shift output.
• need to determine the accuracy of the RTC. Seems to be drifting.

IMU

• probably want to upgrade dual axis IMU

Wifi radio (SWIFI / WIP4a)

• WIP4a w/spi
• Wiport Config

Voltage Clamps

• Vclamp8 : analog PFET clamp
• dclamp1 : passive and digital

Lab bench Support

• FUPs : FUP interpose
• pser1 : dsPIC programmer

Rev 1x0 State / Motor Controller

State/Motor Controller (218)

• 6 known

Rev 1x0 Power Board

FET/POWER board (217)

• 7 known (including 2 from UPD)

Blue radio

???