Difference between revisions of "Rev200 mods"
From DIDEAS Wiki
m |
m |
||
Line 1: | Line 1: | ||
*[[PF Top Nav]]; [[Upd_pcb | PCB]]; [[Aiw_hardware | Hardware]]; [[AIW_assembly | Assembly]] [[PFMENU DOCS | PFCmdMenu]] [[iochan]] | *[[PF Top Nav]]; [[Upd_pcb | PCB]]; [[Aiw_hardware | Hardware]]; [[AIW_assembly | Assembly]] [[PFMENU DOCS | PFCmdMenu]] [[iochan]] | ||
− | *PCA : [[Upd_2x0_218_controller | SC/MC 218]] [[Upd_2x0_217_power_board| FET 217]] [[Rev200_mods]] | + | *PCA : [[Upd_2x0_218_controller | SC/MC 218]] [[Upd_2x0_217_power_board| FET 217]] [[Upd_219_imu | IMU219]] [[Wip4a-spi | Swiffy]] [[Rev200_mods]] |
*PFCMD : [[PFMENU_DOCS | SC]]; [[PFMENU_DOCS_MC | MC]]; [[PFCMD_PY]]; [[Pf_calb_table_py]]; [[Virtual spring test]]; [[PF1_Code_History]]; [[PF EEPROM]] | *PFCMD : [[PFMENU_DOCS | SC]]; [[PFMENU_DOCS_MC | MC]]; [[PFCMD_PY]]; [[Pf_calb_table_py]]; [[Virtual spring test]]; [[PF1_Code_History]]; [[PF EEPROM]] | ||
+ | *SERIES: [[AK-WB1 | S01]] [[AK-WB2 | S02]] [[AK-TEST1 | S03]] [[wow_left]] [[wow_right]] | ||
+ | |||
=PCB needed Revisions= | =PCB needed Revisions= |
Revision as of 05:36, 13 July 2009
- PF Top Nav; PCB; Hardware; Assembly PFCmdMenu iochan
- PCA : SC/MC 218 FET 217 IMU219 Swiffy Rev200_mods
- PFCMD : SC; MC; PFCMD_PY; Pf_calb_table_py; Virtual spring test; PF1_Code_History; PF EEPROM
- SERIES: S01 S02 S03 wow_left wow_right
Contents
PCB needed Revisions
- debug documentation should should show all TP pads, and not be the mirror image.
FET
- populate coin charger as default with 6.3V target voltage (R=1.21meg)
- way to measure coin cell voltage without charger enabled? MTR ENABLED -> disable 6V LDO
- change D13 to diode that actually has 200mV drop @ 1uA. BAS116-F-7 appears to have 427mV @ 0.3uA
SCMC
- populate so local vbat is default (R222, R233 installed)
- locate IMU header for easy access. possibly rot180 - or move 2mm away from edge.
- remove 1.25mm headers for EC30, replace with single 12x0.8mm header. add 3.3V to 5V level shift output.
- need to determine the accuracy of the RTC. Seems to be drifting.
IMU
- probably want to upgrade dual axis IMU
- battery measurement circuit needs to be re-done.