Difference between revisions of "Dclamp1"
From DIDEAS Wiki
m |
m |
||
Line 1: | Line 1: | ||
− | + | {{pf_top_nav}} | |
+ | {{pf_pcbs}} | ||
+ | |||
=dclamp1= | =dclamp1= |
Latest revision as of 15:33, 16 October 2009
PF Users Navigation:
- PCB; Lifefix_users; Pf_users; benchtest_users; CalibFix Users; Hardware; Assembly ; iochan ;
- PCA : PCB ; AKENC SC/MC 218 ; FET 217 ; IMU219 ; Swifi ; Rev200_mods ; PCA Inventory
- Special Commands to the Ankle (PFCMD) : State Controller Commands; Motor Controller Commands; Python Examples; IMU Commands ;PFCMD_PY; Pf_calb_table_py; Virtual spring test; PF EEPROM
- DOC: Pf_users; Powerfoot Keyboard User Interface; Steps for Manual Tuning; "Dashboard" Program For Assisting with Tuning
- NEW (CEB) WIKI
- Torque Feedback Controller Guide
Edit pser2h ; pser2h-b ; pser1 ; FUPs ; ldwash1 ; ldwash2 ; ; Vclamp8 ; dclamp1 ; dclamp2 ; wip4a-spi ; wip4c
dclamp1
Serial #1:
(only passive portion of circuit assembled.)
w/Itest = 89mA (mV) voltage across (.47ohm) is: 2.5 5.7 1.4 2.3 2.3 1.3 3.0 2.0 14.8 1.8 R6 R7 R8 R9 R10 R5 R4 R3 R2 R1
Circuit voltage with test current:
- 1mA 27.8V
- 10mA 28.04V
- 100mA 28.6V
scope captures
[1] [2] [3] ~35 volts on 10,000uF cap applied to circuit via circuit breaker.
- blue is voltage across V+ and V- at array input
- other traces are voltage across the 0.47 resistors.
[4]
[5]
~35 volts on 10,000uF cap applied to circuit via circuit breaker.
- green is the voltage across the 10mF cap
- blue is voltage across V+ and V- at array input
- magenta is voltage across 0.47 ohm resistor of strongest clamp TVS
- difference between blue and green trace is the voltage drop across 12" of 14 AWG wire.
- peak total current is estimated to be 53 amps