Difference between revisions of "MSP430 Datalogger"
From DIDEAS Wiki
m |
m |
||
Line 10: | Line 10: | ||
=[[DL6F Issues]]= | =[[DL6F Issues]]= | ||
− | |||
− | |||
− | |||
Line 28: | Line 25: | ||
* Use BAT54CT-FDICT-ND for SOT-523 diode | * Use BAT54CT-FDICT-ND for SOT-523 diode | ||
− | =SD / MMC Requirements and Test Results = | + | =[[SD / MMC Requirements and Test Results]]= |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
=Delivered= | =Delivered= |
Revision as of 16:28, 12 October 2005
Contents
Datalogger Setup
Working with the datalogger
Information and Specs
- Datasheets and application notes
DL6F Issues
Special Assembly Instructions
- solder mask on large pad adjacent to XX1, XX2, XR1 needs to be partially removed so that crystals can be soldered to PCB
- trace connecting pads of SH1 needs to be cut
- 2 pins of SOT-523 diode should be soldered SH1
- 3rd pin of SOT-523 diode has jumper wire that connects to CD1 far side pad
- push button switch is not populated
- Use BAT54CT-FDICT-ND for SOT-523 diode
SD / MMC Requirements and Test Results
Delivered
- 8-21-05 : modified device (xxx-nnnn, 64MB MMC flash card, DL6 datalogger ser#2) with "alpha firmware"
- 8-21:05 : JTAG programming system (Olimex adapter, parallel port extension, adapt3 interface card, USB cable, 1.5mm DL6 programming cable)
- 8-23-05 : Bill of materials V1.1 for DL6F (XLS format)
- 8-23-05 : PCB Camera artwork for DL6F and instructions for re-producing datalogger.
- 8-24-05 : firmware DL6-V2 (alpha2)
- 8-30-05 : 3 modified devices with 64 MB SD cards, DL6 datalogger ser 3,4,5) with "beta firmware DL6V4"
Special Features Added
- serial number sent by jtag_clock stored in DS1339 written to card on insert action
Assembly DOCS