Difference between revisions of "Ldwash1"
From DIDEAS Wiki
m |
m |
||
(One intermediate revision by the same user not shown) | |||
Line 1: | Line 1: | ||
− | {{pf_top_nav}} {{pf_pcbs}} | + | *{{pf_top_nav}} |
+ | *{{pf_pcbs}} | ||
+ | |||
+ | |||
+ | =trouble shoot= | ||
+ | * sometimes UA1 dies - the symptoms are that the 5V supply is overloaded. When this happens the YELLOW will not be lit when power on the 24V side is applied. | ||
+ | * the RED LED indicates that power from the SC/MC side ia pplied |
Latest revision as of 03:08, 26 November 2009
- PF Users Navigation:
- PCB; Lifefix_users; Pf_users; benchtest_users; CalibFix Users; Hardware; Assembly ; iochan ;
- PCA : PCB ; AKENC SC/MC 218 ; FET 217 ; IMU219 ; Swifi ; Rev200_mods ; PCA Inventory
- Special Commands to the Ankle (PFCMD) : State Controller Commands; Motor Controller Commands; Python Examples; IMU Commands ;PFCMD_PY; Pf_calb_table_py; Virtual spring test; PF EEPROM
- DOC: Pf_users; Powerfoot Keyboard User Interface; Steps for Manual Tuning; "Dashboard" Program For Assisting with Tuning
- NEW (CEB) WIKI
- Torque Feedback Controller Guide
- pser2h ; pser2h-b ; pser1 ; FUPs ; ldwash1 ; ldwash2 ; ; Vclamp8 ; dclamp1 ; dclamp2 ; wip4a-spi ; wip4c
trouble shoot
- sometimes UA1 dies - the symptoms are that the 5V supply is overloaded. When this happens the YELLOW will not be lit when power on the 24V side is applied.
- the RED LED indicates that power from the SC/MC side ia pplied