Pser1

PF Users Navigation:

• PCB; Lifefix_users; Pf_users; benchtest_users; CalibFix Users; Hardware; Assembly ; iochan ;
• PCA : PCB ; AKENC SC/MC 218  ; FET 217 ; IMU219 ; Swifi ; Rev200_mods  ; PCA Inventory
• Special Commands to the Ankle (PFCMD) : State Controller Commands; Motor Controller Commands; Python Examples; IMU Commands ;PFCMD_PY; Pf_calb_table_py; Virtual spring test; PF EEPROM
• DOC: Pf_users; Powerfoot Keyboard User Interface; Steps for Manual Tuning; "Dashboard" Program For Assisting with Tuning
• NEW (CEB) WIKI
• Torque Feedback Controller Guide

Edit pser2h ; pser2h-b ; pser1 ; FUPs ; ldwash1 ; ldwash2 ; ; Vclamp8 ; dclamp1 ; dclamp2 ; wip4a-spi ; wip4c

How to remove ghost USB devices.

pser1e

Rev200 style dsPIC programmer and debug USB serial port. With soldermask/silkscreen [SCH] [TOP] [BOT]

status

10

• 10 - works - 8-27-09 : CEB replaced FT232 and now works, changed RR3-5 to 1k (from 0) to avoid future problems

11

• 11 - works - 8-27-09 : CEB replaced FT232 and now works, changed RR3-5 to 1k (from 0) to avoid future problems

12

works,R3 is 3.9K to allow used with WIP4c and two TXs driving the same signal.

• 8-27-09 : CEB replaced FT232 and now works, changed RR3-5 to 1k (from 0) to avoid future

problems

13

• 13 - works (7-6-09 at LAB)

14

• 14 - works (7-6-09 at LAB)

pser1d

Rev200 style dsPIC programmer and debug USB serial port. No soldermask [SCH] [TOP] [BOT]

status

• #1 - sent to UPD
• #2 - operational at IW
• #3 - resoldered RJ11 connector, however programmer is flaky. Only serial ports.