Difference between revisions of "POT4b BOM"
From DIDEAS Wiki
m |
m |
||
Line 30: | Line 30: | ||
|1 || RR2 || RHM10.0KCCT-ND || 10k EIA0805 || [http://www.digikey.com/scripts/DkSearch/dksus.dll?PName?Name=RHM1.00KCCT-ND DIG] || 0.038 || | |1 || RR2 || RHM10.0KCCT-ND || 10k EIA0805 || [http://www.digikey.com/scripts/DkSearch/dksus.dll?PName?Name=RHM1.00KCCT-ND DIG] || 0.038 || | ||
|- | |- | ||
+ | |||
+ | |||
+ | |1 || DL1, DL2 || P514CT-ND || green gull wing SMT 4.2mm LED || [http://www.digikey.com/scripts/DkSearch/dksus.dll?PName?Name= P514CT-ND DIG] || 0.038 || | ||
+ | |- | ||
+ | |||
|} | |} | ||
UR1 | UR1 |
Revision as of 17:21, 24 January 2006
POT4b Bill of Materials
Please see POT4a bill of materials and make the following changes :
As desired populate all sections except that entitled "reference" ie don't populate RR1-RR4, UR1, CR1
For the reference section populate:
NUM | REFDES | Part# | Desc | Source | Price | Notes |
---|---|---|---|---|---|---|
1 | UR1 | MAX6173AASA | 2.5V voltage reference | Maxim | 6.64 | 2.5V, 5V, or 10V reference depending on application |
1 | CR1 | PCC1853CT-ND | 0.1uF EIA0805 25V Y5V | DIG | 0.052 | require : 0.1u chip cap |
1 | DR1 | BZT52C2V4-7-FDICT-ND | 2.4V zener diode SOD-123 | DIG | 0.43 | zener voltage should be appx 1/2 of the reference voltage |
1 | RR2 | RHM10.0KCCT-ND | 10k EIA0805 | DIG | 0.038 | |
1 | DL1, DL2 | P514CT-ND | green gull wing SMT 4.2mm LED | P514CT-ND DIG | 0.038 |
UR1