Difference between revisions of "POT4 Bill of Materials"

From DIDEAS Wiki
Jump to: navigation, search
m
m
Line 28: Line 28:
 
|-
 
|-
  
−
|1 || JC1 || P15.0HCT || 15 ohm EIA0605 || [http://www.digikey.com/scripts/DkSearch/dksus.dll?PName?Name = P15.0HCT DIG] || 0.09 || 3 way solder bead jumper - solder R between COM and SHIELD option
+
|1 || JC1 || P15.0HCT || 15 ohm EIA0605 || [http://www.digikey.com/scripts/DkSearch/dksus.dll?PName?Name=P15.0HCT DIG] || 0.09 || 3 way solder bead jumper - solder R between COM and SHIELD option
 
|-
 
|-
  
−
|1 || RA1 || 331-499FCT-ND (gain=100), open (gain=1) || EIA1206 resistor to set gain || [http://www.digikey.com/scripts/DkSearch/dksus.dll?PName?Name = 331-499FCT-ND DIG] || 0.088 || for INA128 gain = 1+50K/RA1
+
|1 || RA1 || 331-499FCT-ND (gain=100), open (gain=1) || EIA1206 resistor to set gain || [http://www.digikey.com/scripts/DkSearch/dksus.dll?PName?Name=331-499FCT-ND DIG] || 0.088 || for INA128 gain = 1+50K/RA1
 
|-
 
|-
  
−
|1 || UA1 || INA128UA || Instrumentation Amp SO8 package || [http://www.digikey.com/scripts/DkSearch/dksus.dll?PName?Name = INA128UA DIG] || 5.80 || ALT : many - LT1167, INA122 (Vsup > 32) gain equation may be different
+
|1 || UA1 || INA128UA || Instrumentation Amp SO8 package || [http://www.digikey.com/scripts/DkSearch/dksus.dll?PName?Name=INA128UA DIG] || 5.80 || ALT : many - LT1167, INA122 (Vsup > 32) gain equation may be different
 
|-
 
|-
  
−
|1 || RO1 || 3266W-103-ND(POT), 3266W-503ND(bridge) || (burns3266w) multiturn trim pot  || DIG || ? || 10K for POT, 50K for bridge
+
|1 || RO1 || 3266W-103-ND(POT), 3266W-503ND(bridge) || (burns3266w) multiturn trim pot  || [http://www.digikey.com/scripts/DkSearch/dksus.dll?PName?Name=3266W-103-ND DIG] || ? || 10K for POT, 50K for bridge
 
|-
 
|-
  
−
|1 || U1 || LM324 || quad opamp SO14 (narrow) package || DIG || ? || ALTs : quad opamp (Vsup > 32)
+
|1 || U1 || LM324 || quad opamp SO14 (narrow) package || [http://www.digikey.com/scripts/DkSearch/dksus.dll?PName?Name=LM324 DIG] || ? || ALTs : quad opamp (Vsup > 32)
 
|-
 
|-
  
−
|1 || JF1 || S1012-36-ND || 36 pin 0.1" header pins (36) || DIG || ? || need 4 pins to make a 3 way jumper
+
|1 || JF1 || S1012-36-ND || 36 pin 0.1" header pins (36) || [http://www.digikey.com/scripts/DkSearch/dksus.dll?PName?Name=S1012-36-ND DIG] || ? || this part is 36 pins, 4 pins are needed to make a 3way jumper
 
|-
 
|-
  
−
|1 || JF1 || S9000-ND || 0.1" shorting jumper || DIG || ? || used to select amplifer filter path
+
|1 || JF1 || S9000-ND || 0.1" shorting jumper || [http://www.digikey.com/scripts/DkSearch/dksus.dll?PName?Name=S9000-ND DIG] || ? || used to select amplifer filter path
 
|-
 
|-
  
Line 52: Line 52:
 
|-
 
|-
  
−
|1 || RF1 || RHM13.3KCCT-ND || 13.3K 1% EIA0805 || DIG || ?  
+
|2 || RF1,RF2 || RHM13.3KCCT-ND || 13.3K 1% EIA0805 || [http://www.digikey.com/scripts/DkSearch/dksus.dll?PName?Name=RHM13.3KCCT-ND DIG] || ?  
 
|-
 
|-
  
−
|1 || RF2 || RHM13.3KCCT-ND || 13.3K 1% EIA0805 || DIG || ?  
+
|1 || RF3 || RHM6.65KCCT-ND || 6.65K 1% EIA0805 || [http://www.digikey.com/scripts/DkSearch/dksus.dll?PName?Name=RHM6.65CCT-ND DIG] || ?  
 
|-
 
|-
  
−
|1 || RF3 || RHM6.65KCCT-ND || 6.65K 1% EIA0805 || DIG || ?  
+
|1 || CF1 || 490-1635-1-ND || 5.1nF EIA0805 || [http://www.digikey.com/scripts/DkSearch/dksus.dll?PName?Name=490-1635-1-ND DIG] || ?
 
|-
 
|-
  
−
|1 || CF1 || 490-1635-1-ND || 5.1nF EIA0805 ||
+
|1 || CF2 || 490-1644-1-ND || 22nF EIA0805 || [http://www.digikey.com/scripts/DkSearch/dksus.dll?PName?Name=490-1644-1-ND DIG] || ?
−
|-
 
−
 
 
−
|1 || CF2 || 490-1644-1-ND || 22nF EIA0805 ||
 
 
|-
 
|-
  
Line 70: Line 67:
 
|-
 
|-
  
−
| 1 || CF3 || 490-1632-1-ND || 3.3nF EIA0805 || DIG || ?
+
| 1 || CF3 || 490-1632-1-ND || 3.3nF EIA0805 || [http://www.digikey.com/scripts/DkSearch/dksus.dll?PName?Name=490-1632-1-ND DIG] || ?
 
|-
 
|-
  
  
−
| 1 || CF4 || 490-1644-1-ND || 22nF EIA0805 || DIG || ?
+
| 1 || CF4 || 490-1644-1-ND || 22nF EIA0805 || [http://www.digikey.com/scripts/DkSearch/dksus.dll?PName?Name=490-1644-1-ND DIG] || ?
−
|-
 
−
 
 
−
|1 || RF4 || RHM6.65KCCT-ND || 6.65K 1% EIA0805 || DIG || ?  
 
 
|-
 
|-
  
−
|1 || RF5 || RHM6.65KCCT-ND || 6.65K 1% EIA0805 || DIG || ?  
+
|2 || RF4,RF5 || RHM6.65KCCT-ND || 6.65K 1% EIA0805 || [http://www.digikey.com/scripts/DkSearch/dksus.dll?PName?Name=RHM6.65KCCT-ND DIG] || ?  
 
|-
 
|-
  

Revision as of 20:40, 22 June 2005

POT4 Bill of Materials


POT4 (REV-0)
NUM REFDES Part# Desc Source Price Notes
1 PC1 WM4203-ND 5 pin, 0.1" molex header DIG 0.59
1 CC3 PCC1828CT-ND 0.1u, 25V X7R EIA0805 multilayer ceramic DIG 0.062 optional - provides LP input filter
1 CC3  ? 1 meg EIA0805 DIG  ? optional - stack over CC3 to provide 0 input for no input connection
2 RC1,RC2 P0.0ACT-ND 0.0 ohm EIA0805 DIG 0.077 short inputs
4 CC1,2,4,5 not populated place 0.1u caps here for additional LP input filtering
1 JC1 P15.0HCT 15 ohm EIA0605 DIG 0.09 3 way solder bead jumper - solder R between COM and SHIELD option
1 RA1 331-499FCT-ND (gain=100), open (gain=1) EIA1206 resistor to set gain DIG 0.088 for INA128 gain = 1+50K/RA1
1 UA1 INA128UA Instrumentation Amp SO8 package DIG 5.80 ALT : many - LT1167, INA122 (Vsup > 32) gain equation may be different
1 RO1 3266W-103-ND(POT), 3266W-503ND(bridge) (burns3266w) multiturn trim pot DIG  ? 10K for POT, 50K for bridge
1 U1 LM324 quad opamp SO14 (narrow) package DIG  ? ALTs : quad opamp (Vsup > 32)
1 JF1 S1012-36-ND 36 pin 0.1" header pins (36) DIG  ? this part is 36 pins, 4 pins are needed to make a 3way jumper
1 JF1 S9000-ND 0.1" shorting jumper DIG  ? used to select amplifer filter path
1st LP filter
2 RF1,RF2 RHM13.3KCCT-ND 13.3K 1% EIA0805 DIG  ?
1 RF3 RHM6.65KCCT-ND 6.65K 1% EIA0805 DIG  ?
1 CF1 490-1635-1-ND 5.1nF EIA0805 DIG  ?
1 CF2 490-1644-1-ND 22nF EIA0805 DIG  ?
2nd LP filter
1 CF3 490-1632-1-ND 3.3nF EIA0805 DIG  ?
1 CF4 490-1644-1-ND 22nF EIA0805 DIG  ?
2 RF4,RF5 RHM6.65KCCT-ND 6.65K 1% EIA0805 DIG  ?
BW limited derivative
1 RD1 4.99M 1% EIA0805 DIG  ?
1 RD2 3.0K 1% EIA0805 DIG  ?
1 CD1 100pF EIA0805 DIG  ?
1 CD2 0.1u EIA0805 DIG  ?
differential position output
2 RB1,RB2 P0.0ACT-ND 0.0 ohm EIA0805 DIG  ? increase R for output RC filter by adding matched precision resistors here. Driver output is already 50 ohm.
1 CB1  ? 0.1uF DIG  ? use 25V or larger bipolar precision cap here to increase C in output RC filter. Total C is CB1 + CB2
1 CB2 495-1087-ND 1uF, 50V (bipolar) metalized poly cap DIG  ? output RC filter is CB1 + CB2
1 UB1 DRV135UA differential driver in SO8 package DIG  ?
1 PN1 WM4203-ND 0.1" 5pin molex header DIG  ? mates with :
differential velocity output
2 RB3, RB4 P0.0ACT-ND 0.0 ohm DIG  ? see notes for RB1,RB2
1 CB3 0.1uF DIG  ?
1 CB4 495-1087-ND 1uF, 50V (bipolar) metalized poly cap DIG  ? output RC filter is CB3 + CB4
1 UB2 DRV135UA differential driver in SO8 package DIG  ?
1 PN2 WM4203-ND 0.1" 5pin molex header DIG  ? mates with :
precision (adjustable) voltage reference
4 RR1, RR4 1.60K 1/8watt EIA0805 DIG  ? pair of resistors stacked to increase power to 1/4watt
1 RR2 RHM7.32KCCT-ND 7.32K 1% EIA0805 DIG  ?
1 RR3 RHM2.49KCCT-ND 2.49K 1% EIA0805 DIG  ?
1 UR1 TL1431 adjustable voltage reference in SO8 package DIG  ?
1 CR1 493-2374-1-ND 6.8V, 16V tant (size A / 3216) DIG  ? > 6.8uF to avoid reference instability
power section
2 CE1,CE3 2.2uF 16V tant (Size A / 3216) DIG  ? require : C>1.0uF, V>=16V size A tant
2 CE2, CE4 0.1uF EIA0805 25V DIG  ? require : 0.1u chip cap
2 RL1,RL2 2.74K EIA0805 5% DIG  ?
2 DL1,DL2 P503-ND red gull wing SMT 4.2mm LED DIG  ? P514-ND (green) for bridge board
1 SH1 P0.0ACT-ND 0.0 ohm DIG  ? GND to COM solder bead?
2 RN1, RN2 RHM15.0FCT-ND 15ohm EIA1206 1/4W DIG  ? requires < 20 ohm - reduces inrush current when board first powered and limited total current
Retrieved from "https://mediawiki.dideas.com/index.php?title=POT4_Bill_of_Materials&oldid=183"