Difference between revisions of "PID1"
From DIDEAS Wiki
Line 1: | Line 1: | ||
+ | [[Medialab_Documentation]] | ||
+ | |||
=PID2 (PID1)= | =PID2 (PID1)= | ||
[[Image:Pid2_rev0_top.jpg|thumb|PID2 Top Side]][[Image:Pid2_rev0_bot.jpg|thumb|PID2 bottom side]] | [[Image:Pid2_rev0_top.jpg|thumb|PID2 Top Side]][[Image:Pid2_rev0_bot.jpg|thumb|PID2 bottom side]] |
Revision as of 04:41, 4 June 2005
PID2 (PID1)
Error creating thumbnail: Unable to save thumbnail to destination
Error creating thumbnail: Unable to save thumbnail to destination
Identification
- Board is labeled "medialab/pid1.pcb REV0"
- Board design date 021605
Known Problems
- Board is miss labeled!
- FERR and FOUT LEDs labels need to be swapped
- The TEST POINT header has the P - I - D signals miss labeled the correct order is "Ferr, Fout, Fp, Fd, Fi" instead of "Ferr,Fout, Fd, Fi, Fp"
- Both the PID and POT boards are running hot - hotter than I would like.
- The OPA4134s use 16-20mA per package. This (plus the LEDs) largely explains the 47mA used by the PID board. At +-12V the opamp quiescent current causes 42C rise in the packages.
- The range of the gain adjustment for each of the P, I, D terms doesn't seem adequate
- The P,I,D signals are amplified and mixed in the same stage - and so the amplified signals can't be viewed.