MSP430 Datalogger
From DIDEAS Wiki
Contents
Datalogger Setup
Working with the datalogger
Information and Specs
- Datasheets and application notes
DL6F Issues
Special Assembly Instructions
- solder mask on large pad adjacent to XX1, XX2, XR1 needs to be partially removed so that crystals can be soldered to PCB
- trace connecting pads of SH1 needs to be cut
- 2 pins of SOT-523 diode should be soldered SH1
- 3rd pin of SOT-523 diode has jumper wire that connects to CD1 far side pad
- push button switch is not populated
- Use BAT54CT-FDICT-ND for SOT-523 diode
SD / MMC Requirements and Test Results
Delivered
Assembly DOCS