Revision as of 16:30, 12 October 2005

Datalogger Setup

solder mask on large pad adjacent to XX1, XX2, XR1 needs to be partially removed so that crystals can be soldered to PCB

@@ Line 27: / Line 27: @@
 =[[SD / MMC Requirements and Test Results]]=
-=Delivered=
+=[[DL6F delivery | Delivered]]=
-* 8-21-05 : modified device (xxx-nnnn, 64MB MMC flash card, DL6 datalogger ser#2) with "alpha firmware"
-* 8-21:05 : JTAG programming system (Olimex adapter, parallel port extension, adapt3 interface card, USB cable, 1.5mm DL6 programming cable)
-* 8-23-05 : [http://www.dideas.com/docs/datalogger/datalogger-dl6-bom-v11-082305.xls Bill of materials V1.1 for DL6F (XLS format)]
-* 8-23-05 : PCB Camera artwork for DL6F and instructions for re-producing datalogger.
-* 8-24-05 : firmware DL6-V2 (alpha2)
-* 8-30-05 : 3 modified devices with 64 MB SD cards, DL6 datalogger ser 3,4,5) with "beta firmware DL6V4"
-== Special Features Added ==
-* serial number sent by jtag_clock stored in DS1339 written to card on insert action