Difference between revisions of "MM32BRK-REVB-BOM"
From DIDEAS Wiki
m |
m |
||
(8 intermediate revisions by the same user not shown) | |||
Line 1: | Line 1: | ||
In progress: | In progress: | ||
+ | [[MM32BRB | Back]] | ||
+ | |||
+ | |||
+ | ==MM32 and Analog Connectors== | ||
{| border="0" cellpadding="12" width="100%" | {| border="0" cellpadding="12" width="100%" | ||
|+MM32BRK (REV-B) | |+MM32BRK (REV-B) | ||
+ | |||
|- | |- | ||
!width="5%"| NUM ||width="10%" | REFDES || width="15%"|Part# || width="20%"|Desc || width="10%"|Source || width="10%"|Price || width="30%"|Notes | !width="5%"| NUM ||width="10%" | REFDES || width="15%"|Part# || width="20%"|Desc || width="10%"|Source || width="10%"|Price || width="30%"|Notes | ||
|- | |- | ||
− | | | + | |16 || PL1-8, PR1-8 || WM4203-ND || 5 pin, 0.1" molex header || [http://www.digikey.com/scripts/DkSearch/dksus.dll?PName?Name=wm4203-nd DIG] || 0.59 || mates with : WM2014-ND and requires pins WM2312-ND or WM1114-ND |
Alternative - use 3 pin input WM4201-ND | Alternative - use 3 pin input WM4201-ND | ||
|- | |- | ||
− | | | + | |1 || PM2 || MHB50K-ND || SHROUDED HEADER 50 POS STRAIGHT || [http://www.digikey.com/scripts/DkSearch/dksus.dll?PName?Name=WMHB50K-ND DIG] || 2.81|| populate PM1 if you want to continue the ribbon cable |
+ | |- | ||
+ | |||
+ | |0 || PM3 || || 10 pin SIPT || [http://www.digikey.com/scripts/DkSearch/dksus.dll?PName?Name= DIG] || || optional - for monitoring of PID controller signals | ||
|- | |- | ||
+ | |||
+ | |} | ||
+ | |||
+ | ==Power supply== | ||
+ | {| border="0" cellpadding="12" width="100%" | ||
+ | !width="5%"| NUM ||width="10%" | REFDES || width="15%"|Part# || width="20%"|Desc || width="10%"|Source || width="10%"|Price || width="30%"|Notes | ||
+ | |- | ||
+ | |||
+ | |1 || PB1 || WM4203-ND || 5 pin, 0.1" molex header || [http://www.digikey.com/scripts/DkSearch/dksus.dll?PName?Name=wm4203-nd DIG] || 0.59 || primary power input | ||
+ | |- | ||
+ | |||
+ | |||
+ | |2 || FJ1,FK1 || WK4348BK-ND || fuse || [http://www.digikey.com/scripts/DkSearch/dksus.dll?PName?Name=WK4348BK-ND DIG] || || | ||
+ | |- | ||
+ | |||
+ | |2 || DJ2,DK2 || || 20V, 2W SMB zener || [http://www.digikey.com/scripts/DkSearch/dksus.dll?PName?Name= DIG] || || | ||
+ | |- | ||
+ | |||
+ | |||
+ | |2 || CJ1,CK1 || || 1u, 25V tant 3216 || [http://www.digikey.com/scripts/DkSearch/dksus.dll?PName?Name= DIG] || || | ||
+ | |- | ||
+ | |||
+ | |||
+ | |4 || CJ2-3,CK2-3 || || 0.1u, 25V 0805 || [http://www.digikey.com/scripts/DkSearch/dksus.dll?PName?Name= DIG] || || | ||
+ | |- | ||
+ | |||
+ | |||
+ | |2 || CJ4,CK4 || || 2.2u, 16V tant || [http://www.digikey.com/scripts/DkSearch/dksus.dll?PName?Name= DIG] || || | ||
+ | |- | ||
+ | |||
+ | |||
+ | |1 || UJ1 || LM7812CTB || 12V regulator DPAK 500mA || [http://www.digikey.com/scripts/DkSearch/dksus.dll?PName?Name=MC78M12CDTRKOSCT-ND DIG] || 0.51|| ALT : 497-1210-1-ND | ||
+ | |- | ||
+ | |||
+ | |1 || UK1 || LM7912CBT || -12V regulator DPAK 500mA || [http://www.digikey.com/scripts/DkSearch/dksus.dll?PName?Name=MC79M12CDTRKOSCT-ND DIG] || 0.51 || ALT : LM79M12CT-ND ($1.85) | ||
+ | |- | ||
+ | |||
+ | |2 || DJ1, DK1 || L62601CT-ND || SMT led || [http://www.digikey.com/scripts/DkSearch/dksus.dll?PName?Name=L62601CT-ND DIG] || || | ||
+ | |- | ||
+ | |||
+ | |||
+ | |2 || RJ1, RK1 || || 2.4K 0805 resistor || [http://www.digikey.com/scripts/DkSearch/dksus.dll?PName?Name= DIG] || || | ||
+ | |- | ||
+ | |||
+ | |||
+ | |3 || PS1-3 || || 6 pin SIP for jumper blocks || [http://www.digikey.com/scripts/DkSearch/dksus.dll?PName?Name= DIG] || || | ||
+ | |- | ||
+ | |||
+ | |6 || NA || || jumpers for power distribution || [http://www.digikey.com/scripts/DkSearch/dksus.dll?PName?Name= DIG] || || apply jumpers to PS1-3 | ||
+ | |- | ||
+ | |||
+ | |||
+ | |4 || RJ2-3, RK2-3 || || 5K 0805 resistor || [http://www.digikey.com/scripts/DkSearch/dksus.dll?PName?Name= DIG] || || | ||
+ | |- | ||
+ | |||
+ | |||
+ | |2 || DJ3, DK3 || || SMT led || [http://www.digikey.com/scripts/DkSearch/dksus.dll?PName?Name= DIG] || || these LEDs indicate a blow fuses | ||
+ | |- | ||
+ | |||
+ | |2 || DJ4, DK4 || || SMT led || [http://www.digikey.com/scripts/DkSearch/dksus.dll?PName?Name= DIG] || || these LEDs indicate +- power supplied | ||
+ | |- | ||
+ | |||
+ | |||
+ | |1 || RX1 || || 1K || [http://www.digikey.com/scripts/DkSearch/dksus.dll?PName?Name= DIG] || || optional - for 5V power indicator | ||
+ | |- | ||
+ | |||
+ | |1 || DX1 || || SMT led - red || [http://www.digikey.com/scripts/DkSearch/dksus.dll?PName?Name= DIG] || || optional - for 5V power indicator | ||
+ | |- | ||
+ | |||
+ | |||
+ | |||
|} | |} | ||
==DAC output drivers== | ==DAC output drivers== | ||
− | |||
{| border="0" cellpadding="12" width="100%" | {| border="0" cellpadding="12" width="100%" | ||
!width="5%"| NUM ||width="10%" | REFDES || width="15%"|Part# || width="20%"|Desc || width="10%"|Source || width="10%"|Price || width="30%"|Notes | !width="5%"| NUM ||width="10%" | REFDES || width="15%"|Part# || width="20%"|Desc || width="10%"|Source || width="10%"|Price || width="30%"|Notes | ||
|- | |- | ||
− | |4 || PO1-4 || WM4203-ND || 5 pin, 0.1" molex header || [http://www.digikey.com/scripts/DkSearch/dksus.dll?PName?Name=wm4203-nd DIG] || 0.59 || | + | |4 || PO1-4 || WM4203-ND || 5 pin, 0.1" molex header || [http://www.digikey.com/scripts/DkSearch/dksus.dll?PName?Name=wm4203-nd DIG] || 0.59 || |
− | + | ALT- 2 (unipolar) or 3 (differential) pin connectors | |
|- | |- | ||
|} | |} | ||
Line 29: | Line 107: | ||
====unipolar output option ==== | ====unipolar output option ==== | ||
{| border="0" cellpadding="12" width="100%" | {| border="0" cellpadding="12" width="100%" | ||
− | + | !width="5%"| ||width="10%" | || width="15%"| || width="20%"| || width="10%"| || width="10%"| || width="30%"| | |
− | |||
− | !width="5%"| | ||
− | |||
|- | |- | ||
|4 || SB1-4 || || 0 ohm, 0805 package || [http://www.digikey.com/scripts/DkSearch/dksus.dll?PName?Name= DIG] || || | |4 || SB1-4 || || 0 ohm, 0805 package || [http://www.digikey.com/scripts/DkSearch/dksus.dll?PName?Name= DIG] || || | ||
Line 40: | Line 115: | ||
====differential output option ==== | ====differential output option ==== | ||
{| border="0" cellpadding="12" width="100%" | {| border="0" cellpadding="12" width="100%" | ||
− | + | !width="5%"| ||width="10%" | || width="15%"| || width="20%"| || width="10%"| || width="10%"| || width="30%"| | |
− | |||
− | !width="5%"| | ||
− | |||
|- | |- | ||
− | |||
|0 || UB1-4 || || DRV135UA differential driver || [http://www.digikey.com/scripts/DkSearch/dksus.dll?PName?Name= DIG] || || | |0 || UB1-4 || || DRV135UA differential driver || [http://www.digikey.com/scripts/DkSearch/dksus.dll?PName?Name= DIG] || || | ||
|- | |- | ||
− | |||
− | |||
|0 || CB1 || || 1uF, 3216 tant caps (35V)|| [http://www.digikey.com/scripts/DkSearch/dksus.dll?PName?Name= DIG] || || | |0 || CB1 || || 1uF, 3216 tant caps (35V)|| [http://www.digikey.com/scripts/DkSearch/dksus.dll?PName?Name= DIG] || || | ||
Line 56: | Line 125: | ||
|0 || CB2-5 || || 0.1u 0805 caps, (35V) || [http://www.digikey.com/scripts/DkSearch/dksus.dll?PName?Name= DIG] || || | |0 || CB2-5 || || 0.1u 0805 caps, (35V) || [http://www.digikey.com/scripts/DkSearch/dksus.dll?PName?Name= DIG] || || | ||
|- | |- | ||
− | |||
|0 || CB6-9 || || 1uF bipolar caps || [http://www.digikey.com/scripts/DkSearch/dksus.dll?PName?Name= DIG] || || | |0 || CB6-9 || || 1uF bipolar caps || [http://www.digikey.com/scripts/DkSearch/dksus.dll?PName?Name= DIG] || || |
Latest revision as of 22:40, 24 February 2006
In progress:
Contents
MM32 and Analog Connectors
NUM | REFDES | Part# | Desc | Source | Price | Notes |
---|---|---|---|---|---|---|
16 | PL1-8, PR1-8 | WM4203-ND | 5 pin, 0.1" molex header | DIG | 0.59 | mates with : WM2014-ND and requires pins WM2312-ND or WM1114-ND
Alternative - use 3 pin input WM4201-ND |
1 | PM2 | MHB50K-ND | SHROUDED HEADER 50 POS STRAIGHT | DIG | 2.81 | populate PM1 if you want to continue the ribbon cable |
0 | PM3 | 10 pin SIPT | DIG | optional - for monitoring of PID controller signals |
Power supply
NUM | REFDES | Part# | Desc | Source | Price | Notes |
---|---|---|---|---|---|---|
1 | PB1 | WM4203-ND | 5 pin, 0.1" molex header | DIG | 0.59 | primary power input |
2 | FJ1,FK1 | WK4348BK-ND | fuse | DIG | ||
2 | DJ2,DK2 | 20V, 2W SMB zener | DIG | |||
2 | CJ1,CK1 | 1u, 25V tant 3216 | DIG | |||
4 | CJ2-3,CK2-3 | 0.1u, 25V 0805 | DIG | |||
2 | CJ4,CK4 | 2.2u, 16V tant | DIG | |||
1 | UJ1 | LM7812CTB | 12V regulator DPAK 500mA | DIG | 0.51 | ALT : 497-1210-1-ND |
1 | UK1 | LM7912CBT | -12V regulator DPAK 500mA | DIG | 0.51 | ALT : LM79M12CT-ND ($1.85) |
2 | DJ1, DK1 | L62601CT-ND | SMT led | DIG | ||
2 | RJ1, RK1 | 2.4K 0805 resistor | DIG | |||
3 | PS1-3 | 6 pin SIP for jumper blocks | DIG | |||
6 | NA | jumpers for power distribution | DIG | apply jumpers to PS1-3 | ||
4 | RJ2-3, RK2-3 | 5K 0805 resistor | DIG | |||
2 | DJ3, DK3 | SMT led | DIG | these LEDs indicate a blow fuses | ||
2 | DJ4, DK4 | SMT led | DIG | these LEDs indicate +- power supplied | ||
1 | RX1 | 1K | DIG | optional - for 5V power indicator | ||
1 | DX1 | SMT led - red | DIG | optional - for 5V power indicator |
DAC output drivers
NUM | REFDES | Part# | Desc | Source | Price | Notes |
---|---|---|---|---|---|---|
4 | PO1-4 | WM4203-ND | 5 pin, 0.1" molex header | DIG | 0.59 |
ALT- 2 (unipolar) or 3 (differential) pin connectors |
unipolar output option
4 | SB1-4 | 0 ohm, 0805 package | DIG |
differential output option
0 | UB1-4 | DRV135UA differential driver | DIG | |||
0 | CB1 | 1uF, 3216 tant caps (35V) | DIG | |||
0 | CB2-5 | 0.1u 0805 caps, (35V) | DIG | |||
0 | CB6-9 | 1uF bipolar caps | DIG |