Difference between revisions of "MM32BRK-REVB-BOM"

From DIDEAS Wiki
Jump to: navigation, search
m
m
 
(8 intermediate revisions by the same user not shown)
Line 1: Line 1:
 
In progress:
 
In progress:
  
 +
[[MM32BRB | Back]]
 +
 +
 +
==MM32 and Analog Connectors==
 
{| border="0" cellpadding="12" width="100%"
 
{| border="0" cellpadding="12" width="100%"
 
|+MM32BRK (REV-B)
 
|+MM32BRK (REV-B)
 +
 
|-
 
|-
 
!width="5%"| NUM ||width="10%" | REFDES || width="15%"|Part# || width="20%"|Desc || width="10%"|Source || width="10%"|Price || width="30%"|Notes
 
!width="5%"| NUM ||width="10%" | REFDES || width="15%"|Part# || width="20%"|Desc || width="10%"|Source || width="10%"|Price || width="30%"|Notes
 
|-
 
|-
  
−
|21 || x || WM4203-ND || 5 pin, 0.1" molex header || [http://www.digikey.com/scripts/DkSearch/dksus.dll?PName?Name=wm4203-nd DIG] || 0.59 || mates with : WM2014-ND and requires pins WM2312-ND or WM1114-ND
+
|16 || PL1-8, PR1-8 || WM4203-ND || 5 pin, 0.1" molex header || [http://www.digikey.com/scripts/DkSearch/dksus.dll?PName?Name=wm4203-nd DIG] || 0.59 || mates with : WM2014-ND and requires pins WM2312-ND or WM1114-ND
 
Alternative - use 3 pin input WM4201-ND
 
Alternative - use 3 pin input WM4201-ND
 
|-
 
|-
  
−
|2 || x || MHB50K-ND || SHROUDED HEADER 50 POS STRAIGHT || [http://www.digikey.com/scripts/DkSearch/dksus.dll?PName?Name=WMHB50K-ND DIG] || 2.81||  
+
|1 || PM2 || MHB50K-ND || SHROUDED HEADER 50 POS STRAIGHT || [http://www.digikey.com/scripts/DkSearch/dksus.dll?PName?Name=WMHB50K-ND DIG] || 2.81|| populate PM1 if you want to continue the ribbon cable
 +
|-
 +
 
 +
|0 || PM3 || || 10 pin SIPT || [http://www.digikey.com/scripts/DkSearch/dksus.dll?PName?Name= DIG] || || optional - for monitoring of PID controller signals
 
|-
 
|-
 +
 +
|}
 +
 +
==Power supply==
 +
{| border="0" cellpadding="12" width="100%"
 +
!width="5%"| NUM ||width="10%" | REFDES || width="15%"|Part# || width="20%"|Desc || width="10%"|Source || width="10%"|Price || width="30%"|Notes
 +
|-
 +
 +
|1 || PB1 || WM4203-ND || 5 pin, 0.1" molex header || [http://www.digikey.com/scripts/DkSearch/dksus.dll?PName?Name=wm4203-nd DIG] || 0.59 || primary power input
 +
|-
 +
 +
 +
|2 || FJ1,FK1 || WK4348BK-ND  || fuse || [http://www.digikey.com/scripts/DkSearch/dksus.dll?PName?Name=WK4348BK-ND DIG] || ||
 +
|-
 +
 +
|2 || DJ2,DK2  ||  || 20V, 2W SMB zener || [http://www.digikey.com/scripts/DkSearch/dksus.dll?PName?Name= DIG] || ||
 +
|-
 +
 +
 +
|2 || CJ1,CK1  ||  || 1u, 25V tant 3216 || [http://www.digikey.com/scripts/DkSearch/dksus.dll?PName?Name= DIG] || ||
 +
|-
 +
 +
 +
|4 || CJ2-3,CK2-3  ||  || 0.1u, 25V 0805  || [http://www.digikey.com/scripts/DkSearch/dksus.dll?PName?Name= DIG] || ||
 +
|-
 +
 +
 +
|2 || CJ4,CK4  ||  || 2.2u, 16V tant  || [http://www.digikey.com/scripts/DkSearch/dksus.dll?PName?Name= DIG] || ||
 +
|-
 +
 +
 +
|1 || UJ1  || LM7812CTB || 12V regulator DPAK  500mA || [http://www.digikey.com/scripts/DkSearch/dksus.dll?PName?Name=MC78M12CDTRKOSCT-ND  DIG] || 0.51|| ALT : 497-1210-1-ND
 +
|-
 +
 +
|1 || UK1  || LM7912CBT || -12V regulator DPAK  500mA || [http://www.digikey.com/scripts/DkSearch/dksus.dll?PName?Name=MC79M12CDTRKOSCT-ND  DIG] || 0.51 || ALT : LM79M12CT-ND ($1.85)
 +
|-
 +
 +
|2 || DJ1, DK1  || L62601CT-ND || SMT led  || [http://www.digikey.com/scripts/DkSearch/dksus.dll?PName?Name=L62601CT-ND DIG] || ||
 +
|-
 +
 +
 +
|2 || RJ1, RK1  ||  || 2.4K 0805 resistor  || [http://www.digikey.com/scripts/DkSearch/dksus.dll?PName?Name= DIG] || ||
 +
|-
 +
 +
 +
|3 || PS1-3  ||  || 6 pin SIP for jumper blocks  || [http://www.digikey.com/scripts/DkSearch/dksus.dll?PName?Name= DIG] || ||
 +
|-
 +
 +
|6 || NA  ||  || jumpers for power distribution    || [http://www.digikey.com/scripts/DkSearch/dksus.dll?PName?Name= DIG] || || apply jumpers to PS1-3
 +
|-
 +
 +
 +
|4 || RJ2-3, RK2-3  ||  || 5K 0805 resistor  || [http://www.digikey.com/scripts/DkSearch/dksus.dll?PName?Name= DIG] || ||
 +
|-
 +
 +
 +
|2 || DJ3, DK3  ||  || SMT led    || [http://www.digikey.com/scripts/DkSearch/dksus.dll?PName?Name= DIG] || || these LEDs indicate a blow fuses
 +
|-
 +
 +
|2 || DJ4, DK4  ||  || SMT led    || [http://www.digikey.com/scripts/DkSearch/dksus.dll?PName?Name= DIG] || || these LEDs indicate +- power supplied
 +
|-
 +
 +
 +
|1 || RX1  ||  || 1K    || [http://www.digikey.com/scripts/DkSearch/dksus.dll?PName?Name= DIG] || || optional - for 5V power indicator
 +
|-
 +
 +
|1 || DX1 ||  || SMT led - red    || [http://www.digikey.com/scripts/DkSearch/dksus.dll?PName?Name= DIG] || || optional - for 5V power indicator
 +
|-
 +
 +
 +
  
 
|}
 
|}
  
 
==DAC output drivers==
 
==DAC output drivers==
−
 
 
{| border="0" cellpadding="12" width="100%"
 
{| border="0" cellpadding="12" width="100%"
 
!width="5%"| NUM ||width="10%" | REFDES || width="15%"|Part# || width="20%"|Desc || width="10%"|Source || width="10%"|Price || width="30%"|Notes
 
!width="5%"| NUM ||width="10%" | REFDES || width="15%"|Part# || width="20%"|Desc || width="10%"|Source || width="10%"|Price || width="30%"|Notes
 
|-
 
|-
  
−
|4 || PO1-4 || WM4203-ND || 5 pin, 0.1" molex header || [http://www.digikey.com/scripts/DkSearch/dksus.dll?PName?Name=wm4203-nd DIG] || 0.59 || mates with : WM2014-ND and requires pins WM2312-ND or WM1114-ND
+
|4 || PO1-4 || WM4203-ND || 5 pin, 0.1" molex header || [http://www.digikey.com/scripts/DkSearch/dksus.dll?PName?Name=wm4203-nd DIG] || 0.59 ||  
−
Alternative - use 2 (unipolar) or 3 (differential) pin connectors  
+
ALT- 2 (unipolar) or 3 (differential) pin connectors  
 
|-
 
|-
 
|}
 
|}
Line 29: Line 107:
 
====unipolar output option ====
 
====unipolar output option ====
 
{| border="0" cellpadding="12" width="100%"
 
{| border="0" cellpadding="12" width="100%"
−
|+MM32BRK (REV-B)
+
!width="5%"| ||width="10%" | || width="15%"| || width="20%"| || width="10%"| || width="10%"| || width="30%"|
−
|-
 
−
!width="5%"| NUM ||width="10%" | REFDES || width="15%"|Part# || width="20%"|Desc || width="10%"|Source || width="10%"|Price || width="30%"|Notes
 
−
 
 
 
|-
 
|-
 
|4 || SB1-4 ||  || 0 ohm, 0805 package || [http://www.digikey.com/scripts/DkSearch/dksus.dll?PName?Name= DIG] || ||  
 
|4 || SB1-4 ||  || 0 ohm, 0805 package || [http://www.digikey.com/scripts/DkSearch/dksus.dll?PName?Name= DIG] || ||  
Line 40: Line 115:
 
====differential output option ====
 
====differential output option ====
 
{| border="0" cellpadding="12" width="100%"
 
{| border="0" cellpadding="12" width="100%"
−
|+MM32BRK (REV-B)
+
!width="5%"| ||width="10%" | || width="15%"| || width="20%"| || width="10%"| || width="10%"| || width="30%"|
−
|-
 
−
!width="5%"| NUM ||width="10%" | REFDES || width="15%"|Part# || width="20%"|Desc || width="10%"|Source || width="10%"|Price || width="30%"|Notes
 
−
 
 
 
|-
 
|-
−
 
 
|0 || UB1-4 ||  || DRV135UA differential driver || [http://www.digikey.com/scripts/DkSearch/dksus.dll?PName?Name= DIG] || ||  
 
|0 || UB1-4 ||  || DRV135UA differential driver || [http://www.digikey.com/scripts/DkSearch/dksus.dll?PName?Name= DIG] || ||  
 
|-
 
|-
−
 
−
 
  
 
|0 || CB1 ||  || 1uF, 3216 tant caps (35V)|| [http://www.digikey.com/scripts/DkSearch/dksus.dll?PName?Name= DIG] || ||  
 
|0 || CB1 ||  || 1uF, 3216 tant caps (35V)|| [http://www.digikey.com/scripts/DkSearch/dksus.dll?PName?Name= DIG] || ||  
Line 56: Line 125:
 
|0 || CB2-5 ||  || 0.1u 0805 caps, (35V) || [http://www.digikey.com/scripts/DkSearch/dksus.dll?PName?Name= DIG] || ||  
 
|0 || CB2-5 ||  || 0.1u 0805 caps, (35V) || [http://www.digikey.com/scripts/DkSearch/dksus.dll?PName?Name= DIG] || ||  
 
|-
 
|-
−
 
  
 
|0 || CB6-9 ||  || 1uF bipolar caps || [http://www.digikey.com/scripts/DkSearch/dksus.dll?PName?Name= DIG] || ||  
 
|0 || CB6-9 ||  || 1uF bipolar caps || [http://www.digikey.com/scripts/DkSearch/dksus.dll?PName?Name= DIG] || ||  

Latest revision as of 22:40, 24 February 2006

In progress:

Back


MM32 and Analog Connectors

MM32BRK (REV-B)
NUM REFDES Part# Desc Source Price Notes
16 PL1-8, PR1-8 WM4203-ND 5 pin, 0.1" molex header DIG 0.59 mates with : WM2014-ND and requires pins WM2312-ND or WM1114-ND

Alternative - use 3 pin input WM4201-ND

1 PM2 MHB50K-ND SHROUDED HEADER 50 POS STRAIGHT DIG 2.81 populate PM1 if you want to continue the ribbon cable
0 PM3 10 pin SIPT DIG optional - for monitoring of PID controller signals

Power supply

NUM REFDES Part# Desc Source Price Notes
1 PB1 WM4203-ND 5 pin, 0.1" molex header DIG 0.59 primary power input
2 FJ1,FK1 WK4348BK-ND fuse DIG
2 DJ2,DK2 20V, 2W SMB zener DIG
2 CJ1,CK1 1u, 25V tant 3216 DIG
4 CJ2-3,CK2-3 0.1u, 25V 0805 DIG
2 CJ4,CK4 2.2u, 16V tant DIG
1 UJ1 LM7812CTB 12V regulator DPAK 500mA DIG 0.51 ALT : 497-1210-1-ND
1 UK1 LM7912CBT -12V regulator DPAK 500mA DIG 0.51 ALT : LM79M12CT-ND ($1.85)
2 DJ1, DK1 L62601CT-ND SMT led DIG
2 RJ1, RK1 2.4K 0805 resistor DIG
3 PS1-3 6 pin SIP for jumper blocks DIG
6 NA jumpers for power distribution DIG apply jumpers to PS1-3
4 RJ2-3, RK2-3 5K 0805 resistor DIG
2 DJ3, DK3 SMT led DIG these LEDs indicate a blow fuses
2 DJ4, DK4 SMT led DIG these LEDs indicate +- power supplied
1 RX1 1K DIG optional - for 5V power indicator
1 DX1 SMT led - red DIG optional - for 5V power indicator

DAC output drivers

NUM REFDES Part# Desc Source Price Notes
4 PO1-4 WM4203-ND 5 pin, 0.1" molex header DIG 0.59

ALT- 2 (unipolar) or 3 (differential) pin connectors

unipolar output option

4 SB1-4 0 ohm, 0805 package DIG

differential output option

0 UB1-4 DRV135UA differential driver DIG
0 CB1 1uF, 3216 tant caps (35V) DIG
0 CB2-5 0.1u 0805 caps, (35V) DIG
0 CB6-9 1uF bipolar caps DIG
Retrieved from "https://mediawiki.dideas.com/index.php?title=MM32BRK-REVB-BOM&oldid=3268"