Difference between revisions of "EMG3"
From DIDEAS Wiki
m |
m |
||
Line 1: | Line 1: | ||
− | |||
Gain and filters sections: | Gain and filters sections: | ||
Line 15: | Line 14: | ||
*output of 2nd order LP goes to 16 Hz high pass | *output of 2nd order LP goes to 16 Hz high pass | ||
*followed by gain of 11 amplifier | *followed by gain of 11 amplifier | ||
− | * | + | *stage output through 2K resistor and 800 Hz LP. 0.1uF bypass across output. Total gain ~2900x - resulting in +-9V EMG signals. |
Revision as of 08:20, 20 February 2007
Gain and filters sections:
front end
- subject protection is via 100K resistors on the 3 signals
- 3.3KHz differential filter, 16KHz common mode filter
- instrumentation amp with gain of 25, referenced to common
first output stage (01)
- 16 Hz high pass
- 300 Hz, 2nd order active LP with gain of 10.5
- stage output through 2K resistor and 800 Hz LP. 0.1uF bypass across output. Total gain 262x
2nd output stage (02)
- output of 2nd order LP goes to 16 Hz high pass
- followed by gain of 11 amplifier
- stage output through 2K resistor and 800 Hz LP. 0.1uF bypass across output. Total gain ~2900x - resulting in +-9V EMG signals.