Difference between revisions of "Dclamp1"
From DIDEAS Wiki
m |
m |
||
| Line 22: | Line 22: | ||
==scope captures== | ==scope captures== | ||
*~35 volts on 10,000uF cap applied to circuit via circuit breaker. | *~35 volts on 10,000uF cap applied to circuit via circuit breaker. | ||
| + | **blue trace is V+ and V- on the array | ||
| + | ** other traces are voltage across the 0.47 resistors. | ||
[http://dhcp-17-197.media.mit.edu/ankle/scope_capture/dclamp1-pulse-strong-and-week--wrt-ave.png] | [http://dhcp-17-197.media.mit.edu/ankle/scope_capture/dclamp1-pulse-strong-and-week--wrt-ave.png] | ||
Revision as of 20:23, 12 April 2009
dclamp1
Serial #1:
(only passive portion of circuit assembled.)
w/Itest = 89mA (mV) voltage across (.47ohm) is: 2.5 5.7 1.4 2.3 2.3 1.3 3.0 2.0 14.8 1.8 R6 R7 R8 R9 R10 R5 R4 R3 R2 R1
Circuit voltage with test current:
- 1mA 27.8V
- 10mA 28.04V
- 100mA 28.6V
scope captures
- ~35 volts on 10,000uF cap applied to circuit via circuit breaker.
- blue trace is V+ and V- on the array
- other traces are voltage across the 0.47 resistors.
![[1]](http://dhcp-17-197.media.mit.edu/ankle/scope_capture/dclamp1-pulse-strong-and-week--wrt-ave.png){kind=link}