DL6F Assembly

From DIDEAS Wiki
Revision as of 17:10, 19 February 2006 by Ceb (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

BACK

Assembly Documentation



Special Assembly Instructions

  • solder mask on large pad adjacent to XX1, XX2, XR1 needs to be partially removed so that crystals can be soldered to PCB
  • trace connecting pads of SH1 needs to be cut
  • 2 pins of SOT-523 diode should be soldered SH1
  • 3rd pin of SOT-523 diode has jumper wire that connects to CD1 far side pad
  • push button switch is not populated
  • Use BAT54CT-FDICT-ND for SOT-523 diode
Retrieved from "https://mediawiki.dideas.com/index.php?title=DL6F_Assembly&oldid=3172"