Difference between revisions of "DL6F Assembly"
From DIDEAS Wiki
m |
(No difference)
|
Revision as of 16:31, 12 October 2005
[BACK]
Assembly Documentation
Special Assembly Instructions
- solder mask on large pad adjacent to XX1, XX2, XR1 needs to be partially removed so that crystals can be soldered to PCB
- trace connecting pads of SH1 needs to be cut
- 2 pins of SOT-523 diode should be soldered SH1
- 3rd pin of SOT-523 diode has jumper wire that connects to CD1 far side pad
- push button switch is not populated
- Use BAT54CT-FDICT-ND for SOT-523 diode