AK-TEST1

PF Users Navigation:

• PCB; Lifefix_users; Pf_users; benchtest_users; CalibFix Users; Hardware; Assembly ; iochan ;
• PCA : PCB ; AKENC SC/MC 218  ; FET 217 ; IMU219 ; Swifi ; Rev200_mods  ; PCA Inventory
• Special Commands to the Ankle (PFCMD) : State Controller Commands; Motor Controller Commands; Python Examples; IMU Commands ;PFCMD_PY; Pf_calb_table_py; Virtual spring test; PF EEPROM
• DOC: Pf_users; Powerfoot Keyboard User Interface; Steps for Manual Tuning; "Dashboard" Program For Assisting with Tuning
• NEW (CEB) WIKI
• Torque Feedback Controller Guide

Edit

NOW CALLED S03

• 7-3-09 : REQUIRES CALIBRATION (has been opened)

status

• 7-3-09 : belt broke while pole testing.
• 7-3-09 : CEB removed side plate to replace IMU cable
• 7-2-09 : has broken IMU cable (red)
• 7-2-09 : IMU#2 installed doesn't work.

config

• IMU1 (7-3-09)
• STATE09 (7-3-09)
• FET #??? (7-3-09)
• 28J ramps (7-3-09)
• "drive #5 (6-10-09)" (7-3-09) - not original #5 - as this one lacks shoulder screws.

forcefield calb

• hall zero : apply 2 amps, then switch to mode 0, -1670, then switch to mode 3, -1540
• zero the motor encoder
• apply -4 amps, motenc gets to 24308, hall(normal) 7520
• switch to mode 0, 23824, hall=7340
• switch to mode 3 no change.
• apply +5 amps, hall = -3000
• apply +15 amps, hall = -6000