Hours 1012
From DIDEAS Wiki
- ceb_log todo BMdoc notes hours_1012 hours_1101 hours_1102 hours_1103 lifefix_log T
- garden12 ; emg_2009 ; Enc_2010 ; AKENC ; Kknee1 ; Br46_v1 gps1 ; lifefix ; battery ; loadwasher ; elecdog ; Brushless_control ; ceb_misc_prj ; pf_top_nav ; T
Contents
wed dec 1
9a - 10:30p
- extend pre_build script to work with all controllers, add necessary support file to each project
- work with JS and ZH to discover cause of IMU scaling problem
- work with AB on bluetooth/android - seems to be related to timing and flow control in the BT
- work with KMa to assemble and test battery board set
thur dec 2
- 9:15a - 8:15p -3
- kit to L-tronics
- update BOM and PCB docs.
- meet w/RC and ZH re statemachine bug during TS
- review diag code, email on issues.
- complete integration of shared object into IMU
- complete integration of serial number based scaling of IMU data.
fri dec 3
- 9a - 1:40p
- develope bt_config app
- 3pm - 5:30pm
- meet with RB re integration of test alg
- meet with AB on PDA app
- meet with JS on IMU operation and calb table.
- meet with RC on status
sat dec 4
- 10a - 12:30
- develope BATRCP3 inspection and test procedure.
- 1:30p - 10:30p
- work with Khang on board assembly
- work w/DG on inspection / test procedure
- revise BATMOD3 BOM
todo
- knees to MIT
- reboot PC
- rename BATMOD3s
- email GG re CA inspection, CC K and DG
- order digikey parts for BATMOD
sun dec 5
- 11:30a - 8:40p
- write testing procedure for batrcp
- debug batrcp3.#0107
- full bat system validation, tested charger
mon dec 6
- 8:10a - 10:30p (-45min)
- work out plan for getting BATMOD3 assembled.
- python calibration tables
- testing of BATMOD3, serialization
- photo graph BATMOD3 and BATRCP3 and package for CenCoat, work w/DkG on same
- DigK overnight order for BATMOD3
- work w/ZH on TS detector.
- work on profiler
- testing calb tables.
tue dec 7
- 9:15a - 12:40p
- merge profile support
- calb table integration
- integrate KM into soldering of wires onto boards tonight.
- 1:30p - 1:25a
- extract documents from CA, work w/KA to assemble wires into boards
- document pyshared objects
- debug #22
- support for new KVF files
- debug BT lock up issue
- matlab code to create KVF from IMU.mat files.
wed dec 8
- 9:15a - 7:15p -1hr
- email re assembly issues / documentation
- work w/AB on streaming EEPROM
- complete IMU table conversion
- pyshared -> MC
- debug IMU calb table, create pyshared_addresses.py that handles address lookup
thur dec 9
- 8:40a - 9:45p -1 +15
- developed streaming memory and lib dataport v3
- repaired SM code, related to persistent variables.
- Digikey order for power supplies, other tools
- corrected toestrike pff boost
- discussed documentation procedures w/K
- discussed test diag requirements w/GG
- debug robo_config, able to read / write ram table to IMU
fri dec 10
- 8:45a - 1:45p (-15)
- 3:00p - 9:40p
- robo_config improvements.
- deal with motor emergency at Cog
- investigate #3 motor, find is 8192 counts and cable appears to be correctly wired.
- assist with tuning, again find PV error and trace it to a state 4->5 transisition
- develop 502,503 SC 6 for AB
sat dec 11
- 1pm - 8:55p
- robo_config testing; new dict class that can specify how it is printed
- discuss w/RC how to
- testing of trajectory
- debug #17 failure, traiced to defective SSI signal and exposed wire
- program ENC3e,
- attempt to replace encoder, doesnt fit.
- 10p - 12:15a
- develop acausal kitchen mode processing.
sun dec 12
- 12:35p - 1:50p
- improvements to KM alg.
- respond to emails.
- 2:15p - 4:50 (-15)
- discussion w/RC re PDA IP, and trajectory
- add PV history for swing.
- 5:30p - 6pm
- 8:10 - 11:20p
- add calb tables
- robo_config improvement
mon dec 13
- 8:35a-9:15p -30
- mad rush!
- calb tables update
- install py 2.7.1 on telemetry laptop
- investigate state 6 non-exit issue,
- calb stop #24 to investigate large CD
- prepare #24, #25
- fixed params in #24
tue dec 14
- 11:20a - 1:35a (yes 14 hrs)
- work w/AB to integratne header_parser into update_firmware.py
- work w/BB on diag and wifi_fast dataport
- work w/GG on debug of batrcp remotely.
- get new K2,K3 params into robo. make adjustable in ram.
- update reaD_calb_stop to produce KVF output
- nearly complete table integration
wed dec 15
- 12:30p - 1a -30 min
- lots of random help
- work with DkG re batrcp
- bring in KM, prepare BATMOD and RCP
- locate order blade fuse
- work w/tables and bias
- imu calb tables
thu dec 16
- 9:30a -
- phone discussion to help BB, GG, JS
- document RC