Difference between revisions of "Aiw hardware"
From DIDEAS Wiki
m |
m (→system) |
||
Line 6: | Line 6: | ||
*[[AK-WB1 | WB1]] | *[[AK-WB1 | WB1]] | ||
*[[AK-WB2 | WB2]] | *[[AK-WB2 | WB2]] | ||
− | *[[AK-TEST1 | | + | *[[AK-TEST1 | S03]] (previously TEST1) |
*[[wow_left | Proto 1 / Left]] | *[[wow_left | Proto 1 / Left]] |
Revision as of 18:37, 3 July 2009
Contents
system
02-13-09 :New Thrust bearings, shim bearing sleeve, replaced out of spec large drive pulley, new NORGLIDE bushings & bolts, replace Bluetooth harness, replace battey power leads & flat cable connector on old rev control board. Needs new rev electronics for the show.
- 02-19-09 :New Thrust bearings, shim bearing sleeve, new NORGLIDE bushings & bolts, replace battey & motor power leads, replaced flat cable and connector on State control. Vib motor connector has beem removed because of bad trace and missing pad.
Proto 3
Proto BAK
gear system
- 9.6 est small diameter ?? . (15 teeth?), 5mm more
- ~25mm diameter - (40 teeth), 6mm bore
- w/belt 26.32mm diameter
- 35 mm spacing
- current ratio ~2.5
- large pulley radius could grow by 7.3mm (abs max) - although part of the pyramid is in the way. lathe to fix that.
- 39mm pulley has 62 teeth - for a ratio of 4.13!
pyramid_2008
Drive_assembly_2008
battery packs
- WOW#1 - 12.5 amp fuse
- 5-6-09 : battery pack dropped to 4.5 volts. Charged w/balance, no apparent loss of capacity.
- WOW#2 - 10 amp fuse
- blew in right ankle on 2-19-09 AM
- 02-19-09 upgraded to 12.5 AMP
- WOW#5 - 12.5 amp fuse
- 04-18-09 : 22.47V -> 0.95AHr
- WOW#6 - 15 amp fuse
- 5-6-09 : battery pack dropped to 4.5 volts. Charged w/balance, no apparent loss of capacity.
- 04-18-09 : 22.2V -> 1.037AHr
- blew in right ankle on 2-19-09 AM
- 02-19-09 upgraded to 12.5 AMP
bluetooth
- 100:001 : 8B (PDA -> right) "iwxxx1"
- 100:002 : 65 (PDA -> left) "default"
- 100:003 : DF (PDA #4
- 100:004 ??: 8E (PDA #5)
- ???:??? : 18 (PDA #3)
- others are "Iwxxxx" or "iwxxx"
- PCB dimensions : 2.14 x 1.5 x 0.3"
- box dimensions : 2.26 x 1.6 x 0.76"