Difference between revisions of "MM32BRK"
From DIDEAS Wiki
Line 20: | Line 20: | ||
== LED Indicators == | == LED Indicators == | ||
− | |||
*4 groups of LEDs indicate the presence of power and the state of the fuses. | *4 groups of LEDs indicate the presence of power and the state of the fuses. | ||
− | *Normally the LEDs on either side of the fuse should be dark – when a fuse blows these LEDs should be | + | *Normally the LEDs on either side of the fuse should be dark – when a fuse blows these LEDs should be visible. |
− | *LEDs | + | *LEDs adjacent to the power connectors indicate the presence of power |
==Assembly Variations== | ==Assembly Variations== | ||
FUSES : the fuses socket may be populated with a shorting wire, a fast blow fuse, or a resistors which will act like a slow blow fuse. | FUSES : the fuses socket may be populated with a shorting wire, a fast blow fuse, or a resistors which will act like a slow blow fuse. |
Revision as of 02:57, 2 June 2005
MM32BRK (REV-1)
Identification
Rev 1 is a yellow colored PCB with silver traces and no silk-screen / text labels medialab/mm32brk.pcb REV1 022105
Connectors
- MM32 ribbon cable (2)
- Power (1)
- Analog Inputs (16)
- Analog Outputs (4)
Known Problems
- DAC output headers polarity opposite the power pins
- Although the input connectors are laid out in an orderly grid, the last two inputs (IN14 and IN15) are swapped in the array.
LED Indicators
- 4 groups of LEDs indicate the presence of power and the state of the fuses.
- Normally the LEDs on either side of the fuse should be dark – when a fuse blows these LEDs should be visible.
- LEDs adjacent to the power connectors indicate the presence of power
Assembly Variations
FUSES : the fuses socket may be populated with a shorting wire, a fast blow fuse, or a resistors which will act like a slow blow fuse.