Difference between revisions of "MM32BRK-REVB-BOM"
From DIDEAS Wiki
m (→Power supply) |
m |
||
Line 1: | Line 1: | ||
In progress: | In progress: | ||
− | + | ==MM32 and Analog Connectors== | |
{| border="0" cellpadding="12" width="100%" | {| border="0" cellpadding="12" width="100%" | ||
|+MM32BRK (REV-B) | |+MM32BRK (REV-B) | ||
Line 8: | Line 8: | ||
|- | |- | ||
− | | | + | |16 || PL1-8, PR1-8 || WM4203-ND || 5 pin, 0.1" molex header || [http://www.digikey.com/scripts/DkSearch/dksus.dll?PName?Name=wm4203-nd DIG] || 0.59 || mates with : WM2014-ND and requires pins WM2312-ND or WM1114-ND |
Alternative - use 3 pin input WM4201-ND | Alternative - use 3 pin input WM4201-ND | ||
|- | |- | ||
− | | | + | |1 || PM2 || MHB50K-ND || SHROUDED HEADER 50 POS STRAIGHT || [http://www.digikey.com/scripts/DkSearch/dksus.dll?PName?Name=WMHB50K-ND DIG] || 2.81|| populate PM1 if you want to continue the ribbon cable |
+ | |- | ||
+ | |||
+ | |0 || PM3 || || 10 pin SIPT || [http://www.digikey.com/scripts/DkSearch/dksus.dll?PName?Name= DIG] || || optional - for monitoring of PID controller signals | ||
|- | |- | ||
Revision as of 17:54, 24 February 2006
In progress:
Contents
MM32 and Analog Connectors
NUM | REFDES | Part# | Desc | Source | Price | Notes |
---|---|---|---|---|---|---|
16 | PL1-8, PR1-8 | WM4203-ND | 5 pin, 0.1" molex header | DIG | 0.59 | mates with : WM2014-ND and requires pins WM2312-ND or WM1114-ND
Alternative - use 3 pin input WM4201-ND |
1 | PM2 | MHB50K-ND | SHROUDED HEADER 50 POS STRAIGHT | DIG | 2.81 | populate PM1 if you want to continue the ribbon cable |
0 | PM3 | 10 pin SIPT | DIG | optional - for monitoring of PID controller signals |
Power supply
NUM | REFDES | Part# | Desc | Source | Price | Notes |
---|---|---|---|---|---|---|
1 | PB1 | WM4203-ND | 5 pin, 0.1" molex header | DIG | 0.59 | primary power input |
2 | FJ1,FK1 | WK4348BK-ND | fuse | DIG | ||
2 | DJ2,DK2 | 20V, 2W SMB zener | DIG | |||
2 | CJ1,CK1 | 1u, 25V tant 3216 | DIG | |||
4 | CJ2-3,CK2-3 | 0.1u, 25V 0805 | DIG | |||
2 | CJ4,CK4 | 2.2u, 16V tant | DIG | |||
1 | UJ1 | LM7812CTB | 12V regulator DPAK | DIG | ||
1 | UK1 | LM7912CBT | -12V regulator DPAK | DIG | ||
2 | DJ1, DK1 | L62601CT-ND | SMT led | DIG | ||
2 | RJ1, RK1 | 2.4K 0805 resistor | DIG | |||
3 | PS1-3 | 6 pin SIP for jumper blocks | DIG | |||
6 | NA | jumpers for power distribution | DIG | apply jumpers to PS1-3 | ||
4 | RJ2-3, RK2-3 | 5K 0805 resistor | DIG | |||
2 | DJ3, DK3 | SMT led | DIG | these LEDs indicate a blow fuses | ||
2 | DJ4, DK4 | SMT led | DIG | these LEDs indicate +- power supplied | ||
1 | RX1 | 1K | DIG | optional - for 5V power indicator | ||
1 | DX1 | SMT led - red | DIG | optional - for 5V power indicator |
DAC output drivers
NUM | REFDES | Part# | Desc | Source | Price | Notes |
---|---|---|---|---|---|---|
4 | PO1-4 | WM4203-ND | 5 pin, 0.1" molex header | DIG | 0.59 |
ALT- 2 (unipolar) or 3 (differential) pin connectors |
unipolar output option
4 | SB1-4 | 0 ohm, 0805 package | DIG |
differential output option
0 | UB1-4 | DRV135UA differential driver | DIG | |||
0 | CB1 | 1uF, 3216 tant caps (35V) | DIG | |||
0 | CB2-5 | 0.1u 0805 caps, (35V) | DIG | |||
0 | CB6-9 | 1uF bipolar caps | DIG |