Difference between revisions of "QAKAMP"
From DIDEAS Wiki
m |
m |
||
Line 6: | Line 6: | ||
QAKAMP contains four bridge amplifiers with 2+ pole LP filters and differential output drivers, a high current precision voltage reference, power supply conditioning. The front end uses instrumentation amplifier with 80dB CMR extending to 100KHz. | QAKAMP contains four bridge amplifiers with 2+ pole LP filters and differential output drivers, a high current precision voltage reference, power supply conditioning. The front end uses instrumentation amplifier with 80dB CMR extending to 100KHz. | ||
+ | |||
+ | |||
+ | =Rev A= | ||
+ | *LM358 and OP27 opamp power wired backwards - corrected in Rev B schematic | ||
+ | *V- LED wired backwards in SCH, corrected in Rev B sch | ||
+ | |||
+ | ==SN1 : assembly notes== | ||
+ | *Vref built with TL1431, Ra=2.49, Rb=4.7k -> Vref = 7.2v |
Revision as of 02:04, 8 May 2006
Back to BM Ankle Tech notes Greddy IMU amplifer (GIMUAMP) Ankle MM32 breakout (AKBRK)
QAKAMP contains four bridge amplifiers with 2+ pole LP filters and differential output drivers, a high current precision voltage reference, power supply conditioning. The front end uses instrumentation amplifier with 80dB CMR extending to 100KHz.
Rev A
- LM358 and OP27 opamp power wired backwards - corrected in Rev B schematic
- V- LED wired backwards in SCH, corrected in Rev B sch
SN1 : assembly notes
- Vref built with TL1431, Ra=2.49, Rb=4.7k -> Vref = 7.2v