Difference between revisions of "POT4b"
From DIDEAS Wiki
m |
m |
||
Line 15: | Line 15: | ||
== Identification == | == Identification == | ||
− | [[image: | + | [[image:Rpot4b-pcb-top-revb-061605.png|right|thumb|80px|top side]] |
− | [[image: | + | [[image:Rpot4b-pcb-bot-revb-061605.png|right|thumb|80px|bottom side]] |
− | * | + | *POT4b is a green PCB with white silk screen on two sides. |
*Dimensions 1.75" x 0.85" | *Dimensions 1.75" x 0.85" | ||
*Two mounting holes (diameter = 0.125"), top side clearance > 0.25" | *Two mounting holes (diameter = 0.125"), top side clearance > 0.25" |
Revision as of 20:13, 22 June 2005
revisions from POT4a
- remove OPAMP follower driving cable shield
- change referece from TL1431 to fixed voltage MAX1631
- OPAMP drives REF-
Power Supply
- +12V, GND, -12V recommend
- Supply current < 50mA (20mA typical)
- Maximum supply voltage is +-15V
Identification
- POT4b is a green PCB with white silk screen on two sides.
- Dimensions 1.75" x 0.85"
- Two mounting holes (diameter = 0.125"), top side clearance > 0.25"
- The color of DL1,DL2 indicates the input configuration of the board
Led Indicators
- (DL1, DL2) : A pair of single LEDs indicate the present of power. These LEDs are aligned with the power input to the boards.
- DK1 : The intensity of this dual RED/GREEN LED indicates the voltage of the "position signal".