Revision as of 16:31, 12 October 2005

Datalogger Setup

@@ Line 11: / Line 11: @@
 =[[DL6F Issues]]=
-==Special Assembly Instructions==
-* solder mask on large pad adjacent to XX1, XX2, XR1 needs to be partially removed so that crystals can be soldered to PCB
-* trace connecting pads of SH1 needs to be cut
-* 2 pins of SOT-523 diode should be soldered SH1
-* 3rd pin of SOT-523 diode has jumper wire that connects to CD1 far side pad
-* push button switch is not populated
-* Use BAT54CT-FDICT-ND for SOT-523 diode
 =[[SD / MMC Requirements and Test Results]]=
@@ Line 31: / Line 18: @@
+=[[DL6F Assembly || Assembly Documentation]]=
-=Assembly DOCS=
-*[http://www.dideas.com/docs/datalogger/datalogger-dl6f-assembly-bom-v12-083105.xls Assembly Bill of materials V1.2 for DL6F (XLS format)]
-*[http://www.dideas.com/docs/datalogger/special_assembly_pics/ Special assembly photographs, and PCB layout graphics]