ICC-MSP setup

You can try using ICC430 and the following project to debug the parallel port / J-Tag cable issue.

Install the following compiler:

• Imagecraft MSP430 compiler to test parallel port ftp://ftp.imagecraft.com/pub/pub/icc430dem.exe

Unzip the following project.

ICC430 DL6 TEST PROJECT

To compile and download the project into the DL6 (erasing the existing application) From ICC430 goto Project->Open and select dl6test.prj.

Then press "Shift F9" to compile and download the project into DL6. If it works then the 3 LEDs will flash each 120 degrees out of phase.