DL6F Assembly

From DIDEAS Wiki
Jump to: navigation, search


Assembly Documentation

Special Assembly Instructions

  • solder mask on large pad adjacent to XX1, XX2, XR1 needs to be partially removed so that crystals can be soldered to PCB
  • trace connecting pads of SH1 needs to be cut
  • 2 pins of SOT-523 diode should be soldered SH1
  • 3rd pin of SOT-523 diode has jumper wire that connects to CD1 far side pad
  • push button switch is not populated
  • Use BAT54CT-FDICT-ND for SOT-523 diode