Biomech Hardware Status

From DIDEAS Wiki

Revision as of 02:32, 15 June 2006 by Ceb (talk | contribs) (→‎PS104 (Power supply))

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to: navigation, search

to edit : user/pass = "biomech"

Contents

1 PC/104
2 Other

PC/104

CPU

P101 - 05-12-06 - applied power directly to CPU board, fan and LEDs active, but no video output (CEB)

P102 - 05-12-06 - works great. (CEB)
P103 - 05-12-06 - works great. (CEB)

MM32 Analog IO

M101 : 06-14-2006 : 054-hardware cabnet : Broken.... In both singled ended and differential mode, the analog inputs when read from simulink saturate to 10V. Tieing the inputs to AGND causes them to read ~1.2V. I think the cause of this board failure was an incorrectly build 50 pin ribbon cable. One header was a on backwards. (CEB)

PS104 (Power supply)

P201 - 06-14-06 - works great - used in CEB's PC/104 stack. (CEB)

Other

WN101 - 05-12-06 - USB wireless client (Linksys Wireless-G) - new / works great (CEB)
WN102 - 05-12-06 - wireless travel outer - new - remove AC120 support - started process of adding 5V to 3.3V supply (CEB)
FD101 - 05-15-06 - 3.25" floppy drive - works well for creating PC/104 CFLASH. Power connector pinout - +5 towards middle, GND next pin

Retrieved from "http://mediawiki.dideas.com/index.php?title=Biomech_Hardware_Status&oldid=3352"